Lucky Clover Necklace

Crafts ’n things Craft of the Day

 

Wear your luck around your neck! Kids, create this fun clover necklace to show your Irish spirit this St. Patrick’s Day.

Materials

  • Polyform Sculpey Oven-Bake Clay: Emerald Green
  • Green satin cording, 24” length
  • Large jump ring
  • Clear crystal gem (optional)

Tools

  • Heart cookie cutter, 1/2
  • Pliers
  • Clay-dedicated rolling pin
  • Parchment-lined baking sheet
  • Oven

Basic Supplies

scissors, ruler, toothpick, plastic knife

Directions

Adults, help kids when baking clay in oven.

1. On clean work surface, remove clay from package. To condition, roll clay separately in hands until soft, bending and rolling until pliable. If clay cracks, keep conditioning.

2. Roll Emerald Clay into 1/4”-thickness. Use heart cookie cutter to cut out four hearts (clover) or use plastic knife to cut four heart shapes from clay. For stem, use plastic knife to cut tiny triangle.

3. Position four hearts and stem on parchment-lined baking sheet. Smooth edges. Flip clover over; smooth edges together. Use toothpick to poke hole on top of clover (for jump ring). Add details lines on clover. If desired, press crystal gem in center.

4. Follow manufacturer’s instructions to bake clover in oven. Let cool completely.

5. Use pliers to open jump ring. Insert jump ring through hole on clover; squeeze ring closed.

6. Measure and cut 24” length of green cording. Insert cording through hole on jump ring; knot ends together.

by Phoebe Doehring for Polyform Products

Pot O’ Gold Party Favor

Crafts ’n things Craft of the Day

 

You don’t have to be Irish to have a St. Patrick’s Day party. This party favor is so quick and easy that even a last-minute party planner will have enough time to make dozens. You may not have the rainbow, but you can give your guests their own pots of gold!

Materials

  • Clay pot, 1-1⁄2” diameter
  • Wooden hearts: 1⁄16” thick, 7⁄8” across, three
  • Green craft-foam, scrap
  • Acrylic paints: green, white
  • Gold glitter paint
  • Gold foil-covered candies, enough to fill pot

Tools

  • Matte acrylic spray sealer
  • Black fine-point permanent marker
  • Tracing paper
  • Glue gun and sticks or thick craft glue

Basic Supplies

scissors, ruler, pencil, sandpaper, paper towel, paper plate (for palette), household sponge scrap, paintbrush

Directions

Size

2-1/2″ tall

Favor

1. Basecoat all surfaces of clay pot white. Lightly sand heart edges as needed; wipe dust with paper towel. Paint wooden hearts green.

2. Cut a 5⁄8” square from sponge; sponge paint a green square every 5⁄8” around rim of pot. (Note: There will be six green squares, and six white spaces between squares, around rim.) Lightly sponge pot below rim with green. Spray all painted items with one coat of sealer.

3. Print and cut out pattern. (Note: The blue word “pattern” is a link. To access this pattern, select the link, then download and print pattern.) Transfer one stem onto green craft foam. Cut out stem.

4. With marker, outline stem and each heart with dashed lines; outline squares along rim. If desired, outline white squares 1⁄16” inside edges.

5. Use handle end of paintbrush to dot center of each green square along rim with gold glitter paint.

6. Using photo as guide, adhere hearts and stem in a clover shape to center front of pot. Fill pot with gold foil-covered candies.

by Helen Rafson

St. Patrick’s Day Gift Tin

It seems almost impossible to believe that we are already into March, doesn’t it? Today I’m here with a quick-and-easy idea for dressing up St. Patrick’s Day treats. My family is a big fan of Irish oatmeal, and I love that our favorite brand comes in a really cool tin. I thought it would be fun to upcycle these into packaging for homemade oatmeal cookies.

I started by adding some scrapbook paper circles to cover up the lid. Use the lid as a template and then trim by hand or die-cut (the largest size ring of the Spellbinders Nested Circle dies worked perfectly).

It took less than a minute to cover up the lid, but I think it makes it look so much better.

Also, the lid will come in handy if you plan on mailing the tin. Adding an adhesive dot to the bottom helps keep the ribbon in place.

A sticker makes a quick tag – just adhere it to a scrap of cardstock and trim.

If you want to spend a few more minutes, you can create a custom tag using an image stamped onto die-cut cardstock. Use foam adhesive under the shamrock sticker to add dimension and add a touch of bling with a self-adhesive rhinestone.

You can also add a border to the tin if you like. I didn’t want to cover up too much of the lettering on the front.

These tins are also fun to alter and are the perfect size to hold office or craft supplies… you can find an example of a travel themed tin I created HERE.

By the way, if you are looking for a delicious oatmeal cookie recipe, this has been my go-to recipe for the last few years – the only change I make is to use real butter instead of shortening: Grandmother’s Oatmeal Cookies.

Supplies

  • Karen Foster Design – Shamrocks patterned paper
  • Karen Foster Design – Happy St. Paddy’s Day stickers
  • Papertrey Ink – Luck of the Irish stamp set
  • Close to my Heart – Clover Meadow ink
  • Me & My BIG Ideas – Icons Rhinestones Singles
  • Therm O Web – Permanent Tape Runner, 1/4″ Foam Squares, Zots

Until next time, may the luck of the Irish be with you!

Alice Golden from Golden Moments (www.alicegolden.com)

Lucky Leprechaun Sign

Crafts ’n things Craft of the Day

 

Everyone gets to be Irish on St. Patrick’s Day! This charming painted leprechaun sign is a fun and easy project that’s sure to get your family and friends in the St. Paddy’s Day spirit!

Materials

  • Chalkboard with unfinished wooden frame, 7″x10″
  • Wooden items: heart, 1/8” thick, 4-1/2” across; round head plug, 1/2” diameter; teardrops, 1/16” thick, 2” long, two; rectangles, 1/16” thick, 1/2”x1”, two; craft spoons, two; jumbo craft sticks, two
  • DecoArt American Acrylic Paints: White Wash, Olive Green, True Red, Bright Green, Dark Pine, Gingerbread, Lamp Black, Mocha
  • DecoArt Emperor’s Gold Dazzling Metallic Paint
  • Green craft foam, 3-1/2”x4”
  • Green satin ribbon, 1”-wide, 1/2 yd.
  • Lime green iridescent pom-pom, 1”

Tools

  • Permanent markers: dual-tip (fine/bullet) black, green; extra-fine-tip opaque white
  • Ultra-fine iridescent glitter
  • Sawtooth hanger
  • Beacon Adhesives Fabri-Tac Permanent Adhesive

Basic Supplies

scissors, pencil, ruler, paintbrush, hammer

Directions

size

Approximately 11”x19”

Leprechaun

(Note: Use photo and patterns as guides throughout.)

1. Print patterns. (Note: The blue word “patterns” is a link. To access these patterns, select the link, then download and print patterns.) Transfer details, except face and ears, to heart. Paint head as follows: face Mocha, hair Gingerbread, collar and hat band White Wash, hat Bright Green. Drybrush edges of head with Dark Pine. Paint head plug (nose) Mocha. Transfer remaining details to head. Drybrush cheeks, nose, and inside ears with True Red. Dot cheeks White Wash. Draw eyes with bullet-tip black marker; draw smile and other stitch details with fine tip.

2. Transfer patterns to craft spoons (arms), craft sticks (legs), and rectangles (buckles). To make body, draw a horizontal line across one narrow end of chalkboard frame 2-3/4” down from top for waist; draw 1/2” wide vertical straps 1/2” in from each side. Paint as follows: hands Mocha, leggings and cuffs White Wash, shirt and sleeves Olive Green, overalls and tops of legs Bright Green. Paint bottom of legs and teardrops (shoes) Lamp Black. Paint rectangles (buckles) Lamp Black and Emperor’s Gold. Drybrush edges of body, arms, legs, shoes, and buckles with Dark Pine. Brush thin layer of craft glue over hat band, collar, and cuffs; sprinkle with glitter. Let dry.

3. Transfer pattern details to hands, reversing for right hand. Draw stitch details on overalls, arms, and legs with fine-tip black marker. Draw rounded uneven lines on leggings with bullet-tip green marker. Draw vertical lines on shirt and sleeves with fine-tip green marker. Transfer words to center of chalkboard. Using white marker, draw words and stitch line around chalkboard close to edge.

4. Transfer shamrock to green craft foam; cut out. Drybrush edges with Dark Pine. Dot with White Wash.

5. Adhere nose to face, head to top of body, arms to back of chalkboard, shoes to front of legs, and buckles to front of shoes. Adhere assembled legs to back of body. Adhere pom-pom to left side of hat. Adhere shamrock to hand on left. Let dry. Tie ribbon in a bow; cut ends in inverted “V”. Adhere bow to center of collar. Using hammer, attach sawtooth hanger to center top back of body.

Other Options

  • Use same pattern to create a Christmas elf in red and green. Make a matching ornament from craft foam.
  • For a simpler version, paint the chalkboard and adhere only the shamrock to it.
  • Instead of a sign, make a leprechaun photo frame for a proud Irish friend.

by Mary Ayres

Erin Go Bragh

Crafts ’n things Craft of the Day

 

Even if you’re not Irish, St. Patrick’s Day is a day to celebrate. Greet guests for this fun celebration with this gorgeous Erin Go Bragh cross-stitch design.

Materials

  • Zweigart White 28-count Lugana, 13”x12”
  • DMC 6-strand Embroidery Floss

Tools

  • Embroidery needle

Stitch Type

  • Backstitch: 1 strand
  • Cross-stitch: 2 strands
  • French Knot: 2 strands wrapped two times
  • Specialty Stitch: 3 strands

Basic Supplies

scissors

Directions

Size / STitch Count

Approximate finished size: 6-1/2”x5-1/4”; Stitch Count: 90 w x 75 h”

Erin Go Bragh

1. Print cross-stitch chart and key. (Note: The blue words “chart” and “key” are links. To access these, select the link, then download and print items.)

2. Stitch design centered on fabric over two threads.

3. Backstitch design using 1 strand floss. Stitch French Knots with 2 strands (wrapped two times) and stitch Specialty Stitch using 3 strands.

4. Finish as desired.

by Pamela Kellogg