Crocheted Animal Booties

Crafts ’n things Craft of the Day

Your little ones will love these delightful animal booties! Just crochet and then whipstitch them to a purchased pair of infant socks.

Materials

  • Infant socks in coordinating color, 1 pair each
  • Sport-weight yarn (for elephant), 2.5 oz.: light blue, 1 skein; pale blue, 1 skein; black, small amount for facial features
  • Sport-weight yarn (for lion), 2.5 oz.: light yellow, 1 skein; yellow, 1 skein; white, black, light blue, small amount of each color for facial features

Tools

  • Crochet hook, size E/4 (3.50mm)
  • Yarn needle

Basic Supplies

scissors, ruler

Directions

Size

0-6 months

Special Technique – Loop Stitch

  • 1. Insert hook in st, wrap yarn counterclockwise around first finger of left hand, insert hook from right to left through both loops on finger; adjusting yarn to loop size called for in instructions, pull through st, drop loop, yarn over and pull through loops on hook. See Fig. 1.

 

Gauge

6 sc = 1”; 6 sc rows = 1”

Note

Do not join at end of each rnd unless otherwise indicated.

Elephant Booties (make two)

1. Starting at bottom of sole with light blue yarn, ch 21.

2. Rnd 1. Sc in second ch from hook and in each ch to end of row; working down opposite side on starting ch, sc in each ch. [40 sc]

3. Rnd 2. (2 sc in next sc, sc in each of the next 18 sc, 2 sc in next sc) two times. [44 sc]

4. Rnd 3. (2 sc in next sc, sc in each of the next 20 sc, 2 sc in next sc) two times. [48 sc]

5. Rnd 4. (2 sc in next sc, sc in each of the next 22 sc, 2 sc in next sc) two times [52 sc]

6. Rnds 5-7. Sc in each sc around. [52 sc]

7. Rnd 8. Working in front loop only for this rnd, sc in each st around; fasten off light blue yarn. [52 sc]

8. Rnd 9. Working in back loops of Rnd 7 for this rnd, join pale blue yarn with sc in next st, sc in each sc around. [52 sc] (Note: This round creates a ridge around bootie.)

9. Rnd 10. Sc in each of the next three sc, *(slip st, ch 3, 8 tr, ch 3, slip st) in front loop of next sc for ear*, sc in each of the next 44 sc, repeat between *’s one time for second ear, sc in each of the next three sc.

10. Rnd 11. Sc in each sc around, working in back loop of Rnd 9 at each ear. [52 sc]

11. Rnd 12. Sc in each of the next 12 sc, skip next 28 sc, sc in remaining 12 sc. [24 sc] (Note: This round creates the back of the elephant head.)

12. Rnds 13-14. To begin face, sc in each sc around. [24 sc]

13. Rnd 15. *Sc in next sc, skip next sc, sc in next sc; repeat from * around. [16 sc]

14. Rnd 16. Sc in each sc around. [16 sc]

15. Rnd 17. To begin trunk, *sc in next sc, skip next sc; repeat from * around. [8 sc]

16. Rnds 18-21. Sc in each sc around. Fasten off at end of Rnd 21. Weave in loose ends.

Lion Booties (make two)

1. With light yellow, ch 21. Repeat Rnds 1-7 of Elephant, dropping light yellow yarn at end of Rnd 7. Do not fasten off.

2. Rnd 8. Join yellow yarn in same st where light yellow yarn was dropped, ch 1, turn; working around bootie in opposite direction from Rnds 1-7, work 1/2” loop st (see Special Technique – Loop Stitch) in each sc around; join with a slip st in beginning st. Fasten off tellow yarn. [52 sts]

3. Rnd 9. Pick up light yellow, ch 1, turn; working around bootie in same direction as Rnds 1-7, sc in each st around. [52 sc]

4. Rnd 10. Sc in each of the next two sc, *(slip st, hdc) in front loop of next sc, (dc, tr) in front loop of next sc, (tr, dc) in front loop of next sc, (hdc, slip st) in front loop of next sc for ear*, sc in each of the next 40 sc, repeat between *’s one time for second ear, sc in each of the remaining two sc.

5. Rnd 11. Sc in each sc around, working in back loops of Rnd 9 at each ear. [52 sc]

6. Rnd 12. Sc in each of the next 12 sc, skip next 28 sc, sc in each of the remaining 12 sc. [24 sc] (Note: This round creates the back of the lion head.)

7. Rnds 13-14. To begin face, sc in each sc around. [24 sc]

8. Rnd 15. *Sc in next sc, skip next sc, sc in next sc; repeat from * around. [16 sc]

9. Rnd 16. Sc in each sc around. [16 sc]

10. Rnd 17. *Sc in next sc, skip next sc; repeat from * around. [8 sc]

11. Rnd 18. Slip st in every other sc around until four sc remain. Fasten off; weave in loose ends.

facial features

1. For elephant’s face, use black yarn to make one French knot for each eye and two straight stitches to define top of eye; see Fig. 2. Backstitch a U-shaped smile beneath trunk.

2. For Lion’s face, see Fig. 3. For each eye, work one chain with white and another chain with light blue inside it for iris; work two straight stitches with black for center of eye. Define top of eye with two straight stitches with black. For top of nose, work four chains on each side with yellow yarn, forming an upside down “V.” With black, satin stitch nose; backstitch mouth.

3. For whiskers, thread yarn needle with four strands of white yarn. Insert needle from side to side behind nose; remove needle. Knot ends together on each side of nose. Trim whiskers to length desired. Tack bottom of mouth to instep of bootie.

Finishing

1. Slip one sock into each bootie with toe at animal’s head. Turn sock cuff downward halfway to outside of bootie.

2. With yarn needle and coordinating yarn, whipstitch cuff to bootie, stitching between ribs of cuff; be sure to stretch sock cuff while sewing for a better fit.

by Sue Penrod

Little Lamb Shower Centerpiece

Crafts ’n things Craft of the Day

 

Plastic-foam shapes, some ribbon, and a few yards of fun-to-use loopy chenille are all you need to create this shower show-stopper. After the shower, Little Lamb becomes a cherished nursery memento – a sweet reminder of the very first party thrown in baby’s honor!

Materials

  • Dow STYROFOAM Brand Shapes, one each: egg, 2-15⁄16”x3-1⁄16”, 3-7⁄8”x5-7⁄8”; disc, 1” thick, 10” diameter
  • White jumbo loopy chenille, 4-1⁄2 yds.
  • Tulle, 45” wide, color of choice, 1⁄2 yd.
  • Ribbon: satin, 3⁄8” wide, color of choice, 1⁄3 yd.; baby-print satin or grosgrain, 7⁄8” wide, color of choice, 2 yds.; organdy, 1-1⁄2” wide, color of choice, 1 yd.
  • Wooden items: craft stick, one; dowel, 1⁄4” diameter, 18 inches long
  • Pink animal nose, 12mm
  • Black animal eyes, 9mm, two
  • Gold jingle bell, 3⁄4”
  • White cloth-covered floral wire, 9” length

Tools

  • Pink powdered blush
  • Floral pins
  • Low-temperature glue gun or thick craft glue

Basic Supplies

scissors, pencil, ruler, handsaw, cotton-tip swab, metal nail file

Directions

STEP 1

For lamb body, cut one two-yard length from loopy chenille. Pin one end of chenille length to narrow end of large egg; narrow end of egg becomes lamb’s chest. Coil chenille around body to cover, spot gluing as you go. Pin free end of chenille to wide end of body to secure. Set body aside.

STEP 2

For head, cut one-yard length from loopy chenille. In same way as body, cover smaller egg for head; narrow end of egg becomes lamb’s face.

STEP 3

To join head to body, insert one half of craft stick into center side of head. Remove craft stick; coat one end with glue and re-insert glued end into head. Insert opposite end of craft stick into body. When pleased with angle of head, remove head/craft stick assembly from body. Apply glue to end of craft stick and re-insert into body. Set head/body aside.

STEP 4

For legs, cut four 4-1⁄2” lengths from wooden dowel and four 8” lengths from loopy chenille. Each leg is made in same way. Adhere one end of chenille to one end of dowel. Spiral wrap chenille around dowel, spot gluing as you go. Leave 3⁄4” unwrapped at end of each leg.

STEP 5

To attach legs to body, apply thin layer of glue to exposed dowel; push legs into bottom of body so legs rest at slight outward angle from body. Legs should be about 1-3⁄4” apart where they join body. Front legs should be inserted about 2” behind chest area; back legs should be inserted about 1” from rear of body.

STEP 6

For face, use scissors to trim chenille loops from 2-1⁄2” diameter circle. Be careful not to clip too much or the wire inside the chenille will be exposed. Adhere eyes and nose to face. Use cotton-tip swab or finger to apply blush to cheeks.

STEP 7

For ears and tail, cut three 6” lengths from loopy chenille. Fold each length in half; twist ends to secure. Adhere two lengths, 2-1⁄2” apart, to top of head for ears. Adhere remaining length to back of lamb for tail. Ears should curve downward toward face; tail should stand up straight. Set lamb aside.

STEP 8

To make the base, cut one 32” length from baby-print ribbon. Adhere one end of ribbon to edge of plastic-foam disc. Wrap ribbon around disc; adhere free end of ribbon to secure. Center and adhere lamb to top of base.

STEP 9

To finish base, use metal nail file to tuck finger-gathered tulle into base under and around lamb.

STEP 10

For lamb’s collar, wrap and adhere 3⁄8” wide satin ribbon around neck; trim ribbon ends as needed. Adhere jingle bell to bottom of collar, left of center.

STEP 11

For ear bow, cut 8” length from baby-print ribbon. Fold ribbon into 3”-wide two-loop bow with 1-1⁄2” tails and center loop. Cut floral wire into three 3” lengths. Twist one floral wire length around center of bow; trim wire ends and adhere bow to ear as shown.

STEP 12

For base bow, tie organdy ribbon into 6”-wide four-loop bow with two 3” tails. Wrap center of bow with floral wire; trim wire ends. From remaining baby-print ribbon, tie 4”-wide four-loop bow with two 3” tails and center loop. Wrap center of bow with remaining floral wire. Wire baby-print bow to center of organdy bow, twisting wire ends to secure; trim wire ends. Adhere bow to base on left side of lamb.

by Muriel Spencer

Baby Jar Animal Favors

Crafts ’n things Craft of the Day

 

These baby elephants, giraffes, and monkeys are ready to help celebrate the arrival of your little one!

Materials

  • Baby food jars, three
  • Felt: 9”x12” sheets: yellow, blue, brown, tan
  • Fiberfill stuffing
  • Curling ribbon: 12” lengths, three each: blue, yellow, pink
  • Thread: black, white
  • Black seed beads, six
  • Assorted plastic baby trinkets
  • Candy

Tools

  • Sewing machine
  • DecoArt Antique Lace No-Prep Metal Paint
  • Powdered blush
  • Chenille stems
  • Adhesives: Beacon Adhesives Gem-tac Permanent Adhesive, glue gun and sticks

Basic Supplies

scissors, sponge, needle, newspaper (to cover work surface)

Directions

Favors

(Note: Materials listed are for set of three.)

1. Remove labels from baby food jars; wash and let dry. On covered work surface, sponge lids Antique Lace; set aside.

2. Cut out patterns and felt as indicated. (Note: The blue word “patterns” is a link. To access these patterns, select the link, then download and print patterns.) Machine or hand stitch coordinating pieces together with white thread, leaving small openings for stuffing. Stuff pieces; stitch openings closed. (Note: Stuff body pieces firmly in order for characters to stand upright.)

3. Use black thread to sew beads to faces for eyes and monkey’s nose. Apply blush to animals’ cheeks and monkey’s ears, hands, and feet.

4. Use glue gun to adhere the following: elephant’s ears to head and arms to body; giraffe’s neck to center back of arms. Use craft glue to adhere body and feet to jars. Wrap chenille stems around body pieces to hold in place while drying. Adhere spots to giraffe’s neck.

5. For each jar, tie center of three ribbon lengths together and curl ends. Tie trinkets to ribbon centers; adhere to jar lids. Fill jars with candy.

Baby Shower Games

Check out the list below for a few fun games to play at your next baby shower.

  • Measure the Mother-To-Be: Place spools of ribbon and scissors at tables. Ask guests to each cut a length that they think will fit perfectly around the mom-to-be’s belly. The closest length wins.
  • Diaper the Baby: Divide guests into pairs. Provide each pair with a baby doll, diaper, and doll clothing. The teams must diaper and dress the dolls using only one hand. The fastest dressers win.
  • Candy Count: Fill a plastic baby bottle with small candies. Have guests guess the number of candies in the bottle.
  • Stork Bingo: Photocopy and pass out blank bingo cards. Have guests fill in squares with items they think the mom-to-be will receive as gifts. As gifts are opened, guests mark items on cards until someone marks off a row (Bingo).
  • New Wardrobe: Place a onesie or baby shirt at each place setting, and fabric paints in center of table. Guests decorate a new “wardrobe” for baby. (Insert cardboard between layers of clothing to protect back sides while painting.)
  • Baby Name Race: Provide guests with paper and pen. See who can come up with the most names in one minute. Do girls’ names, then boys’ names.
  • Advice for the New Mom: Decorate a sheet of paper with a “baby theme” (footprints, duckies, etc.). Have guests write advice to the new mom. Place all sheets together in a nice scrapbook for her.

by Debbie Kolehmainen

Twinkle Star Blanket

Crafts ’n things Craft of the Day

 

Whether baby is out and about or ready for a nap, this beautiful crocheted star blanket will keep your precious little one warm and cozy.

Materials

  • Pink worsted-weight yarn, 28 oz.

Tools

  • Crochet hook, size 5 (3.75mm)
  • Yarn needle

Basic Supplies

scissors

Abbreviations

ch = chain
dc = double crochet
rep = repeat
rnd(s) = round(s)
sk = skip
sl st = slip stitch
sp(s) = space(s)
st = stitch

Directions

Size

41″x54″

Medallion

1. Ch 8, sl st to form ring.

2. Rnd 1: Ch 3, 2 dc in ring. (Ch 2, 3 dc in ring) five times. Ch 2 , sl st in top of ch-3.

3. Rnd 2: Ch 3, dc in next 2 dc. (Ch 2, dc in ch-2 sp, ch 2, dc in next 3 dc) around. End with sl st in top of ch-3.

4. Rnd 3: Ch 3, dc in next 2 dc. *(Ch 2, dc in next sp) twice; ch 2, dc in next 3 dc. Rep from * around. End with sl st in top of ch-3.

5. Rnd 4: Ch 3, dc in next 2 dc. *(Ch 2, dc in next sp) three times; ch 2, dc in next 3 dc. Rep from * around. End with sl st in top of ch-3.

6. Rnd 5: Ch 3, dc in next 2 dc. *2 dc in next sp, (ch 2, dc in next sp) twice. Ch 2, 2 dc in next sp, dc in next 3 sps. Rep from * around. End with sl st in top of ch-3.

7. Rnd 6: Ch 3, dc in next 4 dc. *2 dc in next sp. Ch 2, dc in next sp, ch 2, 2 dc in next sp. Dc in next 7 sps. Rep from * around. End with sl st in top of ch-3.

8. Rnd 7: Ch 3, dc in next 6 dc. *2 dc in next sp, ch 2, 2 dc in next sp; dc in next 11 dc. Repeat from * around. End with sl st in top of ch-3.

9. Rnd 8: Ch 3, dc in next 8 dc. *(2 dc, ch 2, 2 dc) in next sp; dc in next 15 dc. Rep from * around. End with sl st in top of ch-3.

10. Rnd 9: Ch 5, skip 2 dc, dc in next dc. (Ch 2, sk 2 dc, dc in next dc) twice. *Ch 2, dc in ch-2 sp; ch 2, dc in same sp. (Ch 2, sk 2 dc, dc in next dc) six times. Rep from * around. End with sl st in third st of ch-5. Fasten off.

Joining Medallions

1. Join medallions on 9th round. (Note: Medallion in-progress is A; medallion being joined is B). Work Rnd 9 to first corner.

2. Dc in ch-2 sp, ch 1, sc in corresponding sp on B; ch 1, ch in same ch-2 sp on A.

3. *Ch 1, sc in next sp on B, ch 1, sc in next sp on A. Continue from * across to corner and join as for first corner. Continue Rnd 9 around.

Joining Multiple Medallions

1. When joining to more than one medallion, work corners as follows: Dc in ch-2 sp on A, ch 1, sc in corresponding sp on B; ch 1, sc in corresponding sp on third medallion; ch 1, dc in same ch-2 sp on A. Continue joining to adjacent side of third medallion and work across.

2. To complete afghan, join 27 medallions: five in Row 1, six in Row 2, five in Row 3, six in Row 4, and five in Row 5. Do not fasten off after finishing Rnd 9 of last medallion.

Edging

1. Row 1: Ch 6, (dc in next dc, ch 3) to corner. Work dc, ch 2, dc in ch-2 sp, (ch 3, dc in next dc) along side. Where medallions are joined at corners, work dc in dc before join, ch 1, dc in dc following join, and continue ( ).

2. Row 2: Ch 5, dc in next dc. (Ch 2, dc in next dc) around. Work corners as for Row 1. In sp above medallion joins, work dc in dc before ch-1 sp, ch 3, dc in ch-1 sp, ch 3, dc in next dc. Continue around. Fasten off.

3. Use yarn needle to weave in all ends

by Darlene Polachic

Quilled Baby Frame

Crafts ’n things Craft of the Day

 

Floral vines and whimsical quilled ducks accent this adorable handmade baby frame for your special little bundle of joy.

Materials

  • Papier-mâché frame, 8”x10
  • Cardstock: pink, blue, light green
  • Quilling paper, 1/8” wide: light green, medium yellow, orange
  • White pearls, 4mm, 12

Tools

  • Slotted quilling tool
  • Embossing tool
  • Paints: mint; dimensional: white, black
  • Gesso
  • Flat paintbrush, 1/2”
  • Paper punches: leaf; medium daisy; small flower; round, 3/16”
  • Beacon Adhesives Zip-Dry Paper Glue

Basic Supplies

scissors, ruler

Directions

STEP 1

Follow manufacturer’s instructions to apply gesso to frame; let dry. Basecoat frame mint. Add white dimensional dots to frame front.

STEP 2

For vines, cut ten 3”-long light green quilling strips. Use fingers to give slight curve to each strip. Place slotted quilling tool into one paper end and curl five to six times. Gently remove tool. Adhere three vines together for left and top sides of frame. Adhere two vines together for lower right and bottom of frame. Adhere vines to frame as shown.

STEP 3

Cut ten 5”-long yellow quilling strips. Roll two strips into loose 7/16” circles (ducks’ heads) and remaining strips into 7/16”-long teardrops (buds). Adhere buds to vines.

STEP 4

Punch out five light green leaves; use embossing tool to make veins. Adhere leaves to vines on bottom right corner. Punch out seven additional leaves, emboss veins, and adhere to vines on upper left corner.

STEP 5

Punch out five pink medium daisies. Use embossing tool to make dimple in centers. Adhere pearls to flower centers. Adhere three daisies to upper left corner and two daisies to lower right corner.

STEP 6

Punch seven blue small flowers. Embellish flowers in same way as pink flowers. Adhere five flowers to upper left corner and two flowers to lower right corner.

STEP 7

For duck’s body, roll two yellow quilling strips into 3/4”-long teardrops. Adhere bodies to top right and bottom left frame corners. Adhere heads to bodies. Cut three small 1/2” orange strips for each duck; fold in half. Adhere two on body for legs and one to face for bill. Punch two blue circles for eyes; adhere to faces. Use black dimensional paint to dot pupils; let dry.

by Sandy Rollinger

Cute Baby Girl Card

Crafts ’n things Craft of the Day

 

Welcome the new baby with a trendy chevron background and an old-fashioned pram.

Materials

  • Cardstock: white rustic (flecked), Bazzill Basics Paper Kraft
  • SEI Cardboard Alphabet
  • BasicGrey Black Micro Mono Cardstock Alphabet Stickers

Tools

  • Computer and color printer
  • Sewing machine and white thread
  • Die-cutting system and Hero Arts Baby Motifs Frame Cuts
  • Hero Arts Stamp Sets: New Baby Clear Set, All Things Arrows Digikit
  • Acrylic block
  • Hero Arts Hero Hues Black Dye Ink Pad
  • Adhesives: foam tape, paper glue

Basic Supplies

paper trimmer, scissors, ruler, pencil, removable tape

Directions

STEP 1

Using computer and software, download digital stamp set. In blank document, insert arrow stamp, recolor, and copy/paste repeatedly to create a chevron background. Print onto rustic cardstock.

STEP 2

Cut 4”x5-1/4” chevron paper panel. Using photo as guide, position carriage die on panel and secure with removable tape. Die cut paper panel; remove cut-out and tape. (Note: Save cut-out carriage to use as an embellishment on another project.)

STEP 3

Sew border around carriage and panel edges.

STEP 4

Make 4-1/4”x5-1/2” Kraft top-fold card. Center die-cut paper panel over card front; carefully stamp baby carriage image through opening. Adhere panel to card with foam tape.

STEP 5

Stamp heart onto chevron paper scrap; detail cut heart and adhere to carriage with foam tape.

STEP 6

Adhere alphabet letters and stickers to card to create sentiment.

Tip

  • Create trendy background paper using digital stamps! This digi stamp set from Hero Arts includes 20 customizable images that you can recolor and resize as desired.

by Lucy Abrams for Hero Arts (www.heroarts.com)

Welcome Baby Card

Crafts ’n things Craft of the Day

 

Celebrate the new arrival with a fun, five-minute card that incorporates both “boy” and “girl” product collections.

Materials

  • Bazzill Basics Paper White OP Cardstock
  • Bella Blvd. Baby Boy Collection Cute Cuts Paper
  • Bella Blvd. Baby Girl Collection Embellishments: Ciao Chip Stickers, Flags
  • Martha Stewart Crafts Adhesive Pearls
  • Whisker Graphics Pink Divine Twine

Tools

  • Paper Smooches A Little Lovin’ Clear Stamp Set
  • Acrylic block
  • Tsukineko Memento Tuxedo Black Ink Pad
  • Adhesives: paper adhesive, clear mini dots

Basic Supplies

paper trimmer, scissors, ruler, pencil

Directions

STEP 1

Make 6”x4” White side-fold card. Cut slightly smaller Cute Cuts paper panel; adhere to card with patterned side up.

STEP 2

Adhere chipboard elephant sticker to left side of card. Adhere flag to card above trunk, tucking pin end behind chipboard.

STEP 3

Tie small twine bow and adhere to elephant’s ear using clear mini dot.

STEP 4

Stamp Tuxedo Black sentiment at lower right. Adhere three pearls beneath sentiment.

Tip

  • Using a 6” or 8” square of patterned paper, transform this same design into a quick mini album cover.

by Ashley Harris (www.ashleyharris.typepad.com)