Turkey Glove Gobblers

Crafts ’n things Craft of the Day

These silly little turkeys are stuffed with a candy surprise! Create several for your child’s Thanksgiving treats for school, or to use as table favors on Thanksgiving Day.

Materials

  • Stretch glove: rust, tan, or brown
  • Craft foam scraps: tan, red, yellow
  • Wiggle eyes, 7mm, two
  • Yellow chenille stem
  • Plastic sandwich bag
  • Candy treat

Tools

  • Thick craft glue

Basic Supplies

scissors, ruler, measuring cup

Directions

STEP 1

  • Print patterns. (Note: The blue word “patterns” is a link. To access these patterns, select the link, then download and print.) Cut patterns from craft foam as indicated on patterns.

STEP 2

  • Use photo as guide to make turkey. Adhere eyes, beak, and wattle to thumb and wing to palm of glove as shown.

STEP 3

  • For legs, cut chenille stem to measure 9”. Fill sandwich bag with approximately 1/2 cup of candy. Center and twist legs around bag above candy; cut away excess bag. Wrap ends of each leg around feet; twist to secure.

STEP 4

  • Place candy bag inside glove so feet are sticking out. Fold up glove cuff 3/4” and bend legs up.

by Kathy Wegner

Happy Harvest Centerpiece

Crafts ’n things Craft of the Day

If you love watching the colorful autumn leaves drift gently to the ground, get ready for the change of season with an easy, new fall centerpiece.

Materials

  • Large foam pumpkin
  • Doodlebug Design Happy Harvest Collection 12”x12” Paper Pack
  • Doodlebug Design Happy Harvest Collection Doodle Seals Cardstock Stickers
  • Doodlebug Design Happy Harvest Collection Doodads Pins
  • Bamboo skewers, six
  • Brown/white dotted grosgrain ribbon, 1” wide
  • Brown fabric strip, 1” wide

Tools

  • Xyron *NEW* 3” Sticker Maker
  • Xyron 1/2” Double-Sided High Tack Tape
  • Xyron 3/8” High Tack Adhesive Dots
  • EK Success Punches: Circle, 1-1/2”; Scallop Circle, 2”
  • Scallop-edge scissors

Basic Supplies

scissors, ruler, pencil

Directions

Size

20″ tall

Happy Harvest Centerpiece

1. Punch one scallop circle and two circles for each of the seven rosettes (“lollies”) from various patterned papers.

2. For each lolly, use scallop-edge scissors to cut two 2”x12” strips from a single patterned paper. (Note: You will need a total of 14 strips for seven lollies; cut strips for each lolly from a different paper.)

3. Accordion-fold strips along “valleys” naturally created by scallops.

4. For each lolly, adhere two matching accordion-folded strips to one another along 2” edge with Xyron 1/2” Double-Sided High Tack Tape. Bring ends together to form a circle and connect them using Xyron 1/2” Double-Sided High Tack Tape.

5. Gather and gently press accordion-folded circle flat to create lolly. Adhere lolly with three Xyron 3/8” High Tack Adhesive Dots to center of one punched circle for back of lolly. Adhere scallop circle to center front of lolly using three Xyron 3/8” High Tack Adhesive Dots. Using Xyron 1/2” High Tack Tape, adhere remaining circle to center of scallop circle. Repeat to create six more lollies.

6. Adhere Doodads pins to centers of six lolly fronts using three Xyron 3/8” High Tack Adhesive Dots. Embellish front of seventh lolly with turkey sticker; set lolly aside.

7. On back side of six remaining lollies, use three Xyron 3/8” High Tack Adhesive Dots to adhere blunt end of bamboo skewer to center of circle. Punch six additional circles from patterned papers and run through Xyron 3” Sticker Maker; cover skewer on lolly back with sticker.

8. Tie length of ribbon in knot around each bamboo skewer.

9. Randomly poke pointed ends of bamboo skewers into foam pumpkin top as shown in photo.

10. Run 1” fabric strip through Xyron 3” Sticker Maker and wrap around center of pumpkin.

11. Use extra fabric to make bow; adhere over fabric strip at center front of pumpkin using three Xyron 3/8” High Tack Adhesive Dots.

12. Adhere turkey lolly to top of bow using three Xyron 3/8” High Tack Adhesive Dots.

Tip

  • You may also use the Xyron Double-Sided High Tack Tape to adhere fabric to the pumpkin for a strong hold.

by Ann Corbiere-Scott for Xyron, Inc. (www.xyron.com)

Fall Candy Jar / Table Décor

Crafts ’n things Craft of the Day

If you’re someone who smiles when the Halloween candy appears in the stores, you’ll love creating this cute-and-easy candy jar to hold your favorite treats. The only problem you may have is numerous trips back to the store to replenish the candy!

Materials

  • Quart-size Mason jar
  • Craft felt: orange, light green, purple, black
  • May Arts Ribbons, 1-1/2” wide: Rust/Black Iridescent (405-15-36), Wired Faux Burlap (445-15-32)
  • Small white buttons
  • Treats of choice

Tools

  • Xyron Creatopia with Fabric Adhesive
  • Xyron 1.5″ Sticker Maker
  • Xyron 3” Sticker Maker
  • Xyron 3/8″ High Tack Adhesive Dots
  • Xyron 1/4″ Double-Sided High Tack Tape
  • Provo Craft Cricut Cuttlebug Die-Cutting System
  • Sizzix Dies: Bigz Branch with Leaves & Flower, Bigz Tim Holtz Alterations Tattered Florals, Sizzlits Vintage Lace

Basic Supplies

scissors

Directions

STEP 1

Using 3” Xyron Sticker Maker, apply adhesive to Rust/Black ribbon and attach around the center of jar.

STEP 2

Die cut Vintage Lace border from black felt; run through the Xyron 1.5” Sticker Maker. Adhere border around jar along center of Rust/Black ribbon.

STEP 3

Run purple, orange, and light green felt sheets through Xyron Creatopia with Fabric Adhesive Cartridge; die cut vines from light green felt and flowers from purple and orange felt. Peel off paper backing and apply to jar over ribbon as shown. Using Xyron 3/8” High Tack Adhesive Dots, apply buttons to centers of flowers.

STEP 4

Wrap burlap ribbon around top of jar; tie into bow. Adhere bow to jar using Xyron 1/4″ Double-Sided High Tack Tape.

STEP 5

Fill jar with your favorite seasonal treat!

Tip

  • Die cut additional flowers from leftover, adhesive-backed felt and store them for future projects; just don’t remove the backing paper until ready to use.

by Gini Williams Cagle for Xyron, Inc. (www.xyron.com)

Fall & Halloween Floral Décor

Crafts ’n things Craft of the Day

Use Xyron adhesives to transform a plain papier-mâché box into seasonal décor that works not only for beautiful autumn days, but also for spooktacular Halloween night!

Materials

  • Papier-mâché box, 5”x5”x5-1/2”
  • Floral foam, 2”x4”x4”
  • Silk flower bunches: autumn mums/sunflowers, black roses
  • Orange berry stem
  • Halloween-themed 6”x6” paper pad
  • Coordinating Halloween-themed cardstock title
  • Orange glitter cardstock
  • Assorted metal mini gears, five
  • Black zipper rose with jeweled center, 2-3/4”
  • Black felt trim, 1/2” wide

Tools

  • Xyron Double-Sided High Tack Tape, 1/2”
  • Xyron High Tack Adhesive Dots: 3/16”, 3/8”
  • Xyron Teresa Collins Adhesive Kit
  • Die-cutting system and jumbo flourish die

Basic Supplies

paper trimmer, scissors, ruler, pencil, glue gun and sticks, wire cutters

Directions

Size

5”x5”x13”

STEP 1

Use glue gun to adhere floral foam into bottom of box.

STEP 2

Cut four 5”x5-1/2” sheet music paper panels to cover box sides.

STEP 3

Apply four strips of Xyron 1/2” Double-Sided High Tack Tape to each face of box along edges. Remove liners from first side of box and press paper panel to surface. Repeat to cover all sides.

STEP 4

Cut four 5”x1” damask paper strips. Adhere strips around sides of box, very slightly above center, using Xyron 1/2” Double-Sided High Tack Tape.

STEP 5

Apply continuous line of Xyron 1/4” Double-Sided High Tack Tape from Xyron Teresa Collins Adhesive Kit around top edge of box. Press felt trim firmly to tape while wrapping box; trim ends to just meet.

STEP 6

For autumn side of box, cut four 1” squares from orange text paper. Using Xyron 3/16” High Tack Adhesive Dots, adhere mini gears to squares as shown. Adhere gear squares to damask strip using Foam Squares from Xyron Teresa Collins Adhesive Kit.

STEP 7

For Halloween side of box, die cut flourish from orange glitter cardstock; adhere to box as shown using Xyron 3/16” High Tack Adhesive Dots. Mat cardstock title on orange glitter cardstock; adhere layers together using Xyron 1/2” Double-Sided High Tack Tape. Adhere title to box using Foam Squares from Xyron Teresa Collins Adhesive Kit. Adhere zipper rose to box using several Xyron 3/8” High Tack Adhesive Dots. (Note: If weight of rose pulls it away from box, reattach rose using glue gun.)

STEP 8

To display autumn side of box, insert mums into foam. To display Halloween side of box, remove mums and insert berry stem and black roses. Check fit; trim stem ends of floral bunches as needed using wire cutters before inserting back into foam.

Tip

  • Unlike other double-sided liner tapes, Xyron Double-Sided High Tack Tape can be torn by hand and quickly applied to a variety of surfaces, saving you time.

by Xyron, Inc. (www.xyron.com)

Seasonal Decorating Success is Guaranteed!

I have a long history of good intentions followed up by last minute rushes to get things done. I love to send handmade Christmas cards, but a week before international Christmas mail closes is not the time to be making them. I also love to decorate the table for holidays but that too needs to not only be planned in advance but also executed in advance. So this year I’m combining intention with execution and getting started early.

My table project for the holidays is autumn-themed and I’ve chosen oak leaves and acorns. The oak is a wonderful tree – it looks great all year round. In California, where I live, we have them in abundance and each year I watch as they sprout small green shoots of leaves that quickly turn into wonderful canopies of the deepest green. In autumn, they turn a wonderful gold and litter the ground with acorns that get scooped up by bouncy squirrels.

This year’s holiday decorations are oak leaves and acorns fashioned into table decorations and napkin rings made from AMACO Cloud Clay. Cloud Clay is an air-dry clay that is soft to work with, it stretches easily, and it dries to a light and flexible finish that feels just a teeny bit like suede. For this project you’ll need browns and yellows, so I’d grab a 4 oz. pack of Terra Cotta or Brown, one of White and one Yellow or Orange. You will also need an oak leaf cookie cutter – or some other leaf shape cutter. While you can cut the leaves by hand, cookie cutters make the project go a bit smoother. Add an acrylic roller, thin knitting needle, and a non-stick work surface and you’re done.

Start by pinching off an egg-size piece of clay and pull and fold it until it is nice and pliable. If you like, you can mix bits of various colors of clay to get custom colors – the colors mix very quickly so you can easily get a range of autumn golds and browns.

Roll the clay to around 1/8 -1/4″ thickness and press out the shapes with the cutter. Use the knitting needle to press veins into the leaves. Bend the leaves along the middle vein and curve the ends. Set the leaves aside to dry a little.

Make the acorns from small teardrop shapes of clay and add caps made from a second color of clay. Use the pointy end of the knitting needle to texture the acorn caps.

Assemble the leaves and acorns into groups – two leaves and two acorns. If the clay is still a bit wet, the pieces will stick together easily. If not, dampen them slightly and adhere.

Napkin rings are easily made from a small snake of clay flattened slightly and twisted around to make a circle. Press the ends together to seal. You can then add a leaf and acorn combination to each napkin ring.

Plan for a napkin ring for each guest and a few extra leaf and acorn combinations to scatter around the table. Cloud Clay items are extremely durable, so at the end of the holidays, pack them up carefully and they’ll be ready for the next year’s festivities.

by Helen Bradley (www.craftinggoodness.com)