Bead and Craft Foam Flag

Crafts ’n things Craft of the Day

 

Celebrate the Memorial Day holiday! Here’s a quick-and-easy project to make that’s great for any patriotic celebration.

Materials

  • Craft foam: blue, white
  • White iridescent cording, 112” length
  • Pony beads: 49 red, 42 white

Tools

  • Hole punch, 1/8”
  • Beacon Adhesives Craft Foam Glue

Basic Supplies

paper, pencil, scissors, ruler, transparent tape

Directions

STEP 1

Print and cut out pattern. (Note: The blue word “pattern” is a link. To access this pattern, select the link, then download and print pattern.) Follow directions on pattern.

STEP 2

Cut blue craft foam to 2-3/4” square. To make the flag, see Figure 1. Use hole punch to punch nine holes in blue foam where indicated by dots. Cut seven 15” lengths and one 7” length from cord. Wrap a small piece of tape around each cord end and twist tape into points. (Note: The tape makes it easier to thread cording through holes and beads.) Thread both ends of each 15” length through bottom holes of square from back to front, then thread ends through loop formed by cord, and pull cord ends tight. See photo. Thread seven red beads and six white beads onto each cord group alternating colors, beginning and ending with red beads. Repeat same for remaining cord groups. Remove tape. Knot ends of each cording group 4” from bottom edge of blue foam square.

Figure 1

STEP 3

For hanging loop, thread each end of 7” cord through top holes of blue foam square from front to back. Knot cord ends at back to secure. See photo. Adhere star to center front of blue foam square. Let dry.

by Mary Ayres

Beaded Safety Pin Jean Charms

Crafts ’n things Craft of the Day

 

Kids can express their personality while adding a bit of flair to their wardrobe with these fun-and-easy safety pin charms.

Materials

  • Darice 2-1/4” safety pin: gold or silver
  • Gold or silver charm of choice
  • Large beads

Darice Safety Pin

Directions

 (Note: Materials listed are for one charm.)

STEP 1

Open safety pin.

 STEP 2

Add beads and charms as desired.

STEP 3

Attach charm onto belt loop.

by Chris Malone

Straw Flowers

Crafts ’n things Craft of the Day

 

Kids, surprise Mom this Mother’s Day with a special garden of flowers to let her know how much you care!

Materials

  • 2-1⁄2” clay pot
  • 2” plastic-foam ball
  • Crazy straw in choice of color
  • 3-1⁄4” pre-cut craft foam flower and flower center in choice of color
  • Green felt, scrap
  • 1⁄2 cup of deer moss

Tools

  • Thick craft glue
  • Acrylic Paint in color of choice (optional)

Basic Supplies

scissors, pencil, ruler

Directions

(Note: Materials listed are for one flower.)

1. Press plastic-foam ball into bottom of pot, securing firmly in place. Adhere deer moss to top of foam ball. Let dry.

2. Adhere flower center to flower. Adhere 1” of top end of straw to back of assembled flower.

3. Freehand cut leaves from green felt and adhere to each side of straw as desired.

4. Insert bottom of straw into center of moss and foam ball.

Tip

  • For extra pizazz, paint flower pots in bright colors!

by Julie Streapy

May Day Pocket Full of Posies

Crafts ’n things Craft of the Day

 

Baskets of sweets or spring flowers mysteriously appear on doorsteps as the traditional custom for May Day, celebrated May 1. Use old blue jean pockets to create the perfect holder for your May Day flowers or treats, then secretly surprise your neighbors, family, and friends.

Materials

  • Old blue jeans with pockets
  • Ribbon in color of choice, 3/8”, 18” length per pocket
  • Miscellaneous scrap items: fabric, felt, buttons, pearls, ribbons, jewelry, etc.
  • Silk flowers

Tools

  • Fabric paint
  • Needle and thread (optional)
  • Adhesives: thick craft glue, glue gun and glue sticks

Basic Supplies

scissors, ruler, pinking shears

Directions

(Note: Adult supervision is needed when using a glue gun.)

STEP 1

To cut out pocket, use pinking shears to cut jeans approximately 3/8” from sides and bottom of pocket and 1-1/4” to 1-1/2” from top of pocket. See photo.

STEP 2

For hanging loop, adhere each end of 18” length ribbon to top corners of pocket. Adhere (or sew) buttons to top of each hanging loop end.

STEP 3

Referring to photo as guide, decorate front of pocket as desired using miscellaneous scraps and fabric paint. To create heart and butterfly shapes, refer to Figure 1.

STEP 4

Fill pocket with silk flowers.

by Vicki Felix

T-Shirt Pillow

Crafts ’n things Craft of the Day

 

Rescue a favorite old t-shirt from the garage sale stack, then cleverly restyle it into a custom lounge pillow for your kid’s room.

 

Materials

  • T-shirt
  • Pillow insert, 14”x18”

Tools

  • Sewing machine and coordinating thread
  • Air-soluble fabric marker
  • Hook-and-loop tape (optional)
  • Beacon Adhesives Liquid Thread (optional)

Basic Supplies

scissors, ruler or yardstick, straight pins

Directions

STEP 1

Place shirt flat on table, right side up. Use scissors to split side seams and to remove sleeves along seams. Cut across top of shirt just below neck, separating it into front and back sections.

STEP 2

Decide which way you want your artwork oriented, horizontally or vertically. Use fabric marker to draw a 19-1⁄4”x14-1⁄4” rectangle on front of shirt, encompassing artwork; cut for pillowcase front.

STEP 3

Draw 20”x15” rectangle on back section of shirt; cut for pillowcase back. Cut rectangle in half, creating two 15”x10” pieces.

STEP 4

Place pillowcase front on table, right side up. Place two pillowcase back sections on top of front section, right side down, lining up outside edges and overlapping edges at center. Pin fabric to secure.

STEP 5

Sew, or glue, layers together 5⁄8” from outside edge of rectangles. If necessary, let glue dry. Turn pillowcase inside out through center opening. Insert pillow. If desired, sew or glue small piece of hook-and-loop tape to opening to help keep it closed; follow package directions.

Tips

  • Sew a bunch of t-shirt designs together to make a comforter cover.
  • Use size L or XL t-shirts with center artwork for best results.

by Aimee Dolby

Garden Glove Turtle Puppet

Crafts ’n things Craft of the Day

 

Kids can turn a glove into a turtle and use their imaginations for endless hours of fun!

Materials

  • Brown jersey work glove or garden glove
  • Self-adhesive felt, one sheet each: kelly green, cocoa brown
  • Wiggle eyes, 10mm, two
  • Polyester batting, 3/4” loft, 5” scrap
  • Polyester fiberfill, scrap

Tools

  • Red dimensional fabric paint
  • Liner paintbrush
  • Beacon Adhesives Fabri-Tac Permanent Adhesive

Basic Supplies

scissors, paper

Directions

STEP 1

Print and cut out patterns following instructions listed. (Note: The blue word “patterns” is a link. To access these patterns, select the link, then download and print patterns.) Cut spots apart where indicated by dashed lines on pattern.

STEP 2

For top shell, remove paper backing from spots; place spots on one side of shell. See photo. Turn over. Place 5” batting scrap on shell pattern; trim batting 1/4” smaller than outside edges of shell. Remove paper backing from shell; press batting onto adhesive in center of shell, leaving 1/4″ around all edges. For bottom shell, remove paper backing and press over batting so shell edges line up (see photo). Pinch edges together tightly.

STEP 3

Adhere shell onto top of glove. See photo for placement. For head, firmly stuff small amount of fiberfill into tip of middle finger. Adhere eyes to head. Use fabric paint to paint squiggly mouth below eyes.

by Sandy Parpart

Beaded Dangle Jean Charm

Crafts ’n things Craft of the Day

 

Not only will this pretty beaded dangle charm add personality to your jeans, but the photo charm is a perfect keepsake to remember those you love.

Materials

  • Darice Big Clasp-Large Clasp: Silver
  • Beadalon Bead Stringing Wire
  • Blue Moon Silver Photo Frame Charm
  • Assorted beads
  • Silver crimp beads, two

Tools

  • Crimp pliers
  • Wire cutters

Basic Supplies

ruler

Directions

STEP 1

Cut 5” wire length.

STEP 2

Thread crimp bead on wire end. Thread wire end through clasp and back through crimp bead, leaving 1/2” tail. Push crimp bead close to clasp loop.

STEP 3

Squeeze crimp bead with pliers to flatten and hold wire in place.

STEP 4

String 2-1/2” of beads onto wire, ending with other crimp bead. Thread wire end through photo charm loop and back through crimp bead.

STEP 5

Use pliers to flatten crimp bead, threading wire end back through two beads. Trim excess wire.

STEP 6

Attach dangle charm onto belt loop.

by Chris Malone

Easter Sheep

Crafts ’n things Craft of the Day

 

For a fantastic last-minute decorating idea, create this Easter sheep with your kids and fill with flowers, candy, eggs, and grass for an adorable Easter dinner centerpiece.

Materials

  • Recycled box
  • White cardstock or construction paper
  • White curling ribbon
  • Wiggle eyes, two
  • Blue/white checked ribbon, 6” length
  • Silver bell, 1⁄2”
  • White cord, 4” length

Tools

  • DecoArt Americana Acrylic Paints: White Wash, Baby Blue
  • Black markers: fine-tip, medium-tip
  • API The Ultimate! Glue

Basic Supplies

scissors, paintbrush, newspaper (to cover work surface)

Directions

STEP 1

Cut off top of box to desired height. (Note: Box height should be a minimum of 5-1/2” tall.) Round top edge with scissors.

STEP 2

On covered work surface, paint inside of box Baby Blue and outside White Wash. Let dry. Using fine-tip marker, outline rounded edges on top of box.

STEP 3

Print and cut out pattern. (Note: The blue word “pattern” is a link. To access this pattern, select the link, then download and print pattern.) Using fine-tip marker, draw outline and nose on head. Adhere wiggle eyes to head. Fold back flap on head and adhere to front of sheep.

STEP 4

Tie ribbon bow. Thread cord through bell and tie around bow’s center. Adhere bow with bell under head.

STEP 5

Cut curling ribbon into 3” lengths and curl using edge of scissors. Adhere pieces to sheep.

STEP 6

For legs, cut four 2-1/2”x3” strips from white paper. Use medium-tip marker to draw line on one long edge (hoof) of each strip. Roll strips into 3⁄4” tubes (legs) and adhere closed. Using scissors, make 1/4” snips around top edge of tube (side opposite of hoof) and fold paper down to create tabs for adhering to bottom of box. Adhere legs to bottom of sheep with black line on bottom for hooves.

Tips

  • Young kids can paint the sheep while you cut and curl ribbon. All they’ll have to do is glue!
  • Use a paper plate as a palette for paint or as an easier way for little kids to apply glue. Just give them a sponge scrap and have them blot glue onto ribbon ends.
  • Try cloud decorative-edge scissors to round the box top!

Another idea…

  • Pack your sheep with small travel items, candy, a deck of cards, mini perfume bottles, and other small gifts. Deliver to your local nursing home or to a local shut-in in your neighborhood!

by Mary Ayres

Make a Felt VW Bug

 

I have had a long love affair with the humble VW bug. My sister used to own a crimson one and we would spend hours happily tinkering with it on weekends together, fixing the engine and the brakes. Seriously, cars were very easy to work on in the days before they built pollution controls and computers into them.

I also have an ongoing love affair with felt and I have a few sheets of a delicious recycled felt from Kunin that is printed in bright pink with black polka dots. It seems like a perfect match – VW bug and pink-and-black polka dots. So here is my take on a felt plush bug of the automotive type.

Materials & Tools

  • Kunin Felt, 8-1/2″x11″: black, pink/black polka dot
  • DMC Black #5 Pearl Thread
  • Fiberfill
  • Tracing paper
  • Scissors
  • Needle
  • Pencil

Hand draw a VW bug or download my template from here: http://www.http-design.com/2013/03/free-vw-bug-pattern-download.html.

Fold the polka dot felt in half and pin the template to the felt. Cut out two car shapes.

Pin the wheel and window templates to the black felt and cut the two tires and two windows.

Flip the polka dot felt so the pink side faces up and pin the fender templates to it. Cut front and rear fenders.

Using only the front of the car, pin all of the black and plain pink pieces to the car. Sew on the windows using a straight stitch.

Sew around the top half of the wheels and the fenders using straight stitch. Add stitch lines to define doors and other elements marked on the template.

Pin both pieces of the car together – right sides out and sew around the edge using blanket stitch leaving a small area not sewn. Use this to fill the car with a small amount of fiberfill pushing it into the wheels and the front and rear of the car.

Finish sewing up the shape. Enjoy!

 by Helen Bradley (www.craftinggoodness.com)

Turtle Clay Zoo Friend

Crafts ’n things Craft of the Day

 

Take a hint from the turtle and slow down to enjoy some creative time with your kids!  This playful turtle is the last of the Clay Zoo Friends in Crafts ‘n things Craft-of-the-Day projects. Whether on a safari or a visit to the zoo, enjoy the trip to wherever your imagination may lead you.

Materials

  • Polyform Sculpey Bake Shop Oven-Bake Clay: Green, Red, Yellow

Tools

  • Parchment-lined baking sheet
  • Oven thermometer
  • Oven

Basic Supplies

toothpick

Directions

Size

2″ tall

note

Adults, help kids when baking clay in oven.

Turtle

1. On clean work surface, remove clay from packages. To condition, roll clay separately in hands until soft, bending and rolling until pliable. If clay cracks, keep conditioning.

2. For turtle, roll large Green ball (shell), two small Green balls (eyes), and five small Green teardrops (head and legs). Press legs on bottom of shell and head on front of shell. Roll small Red and tiny Yellow balls (spots); flatten and press on shell. See photo. Press Green eyes to top of teardrop head. Roll two tiny Yellow balls (eyes); press on eyes. Use toothpick to add eye and nostril holes and details to legs.

3. Position turtle on parchment-lined baking sheet. Follow manufacturer’s instructions to bake in oven. Let cool completely.

for Polyform Products (www.sculpey.com)